IMPORTANT NOTICE - Sage Pay has withdrawn support for your browser for security reasons. If you would like to make a purchase with a card you will need to switch to a current browser such as FireFox, Chrome or Internet Explorer 9 or above. Please accept our apologies for the inconvenience.
END OF LIFE NOTICE
This product has been discontinued by the manufacturer.
The replacement is the Datalogic PowerScan PD9130.
Some compatible products may still be available. Please see the menu above.
If you need assistance in selecting an alternative please ask for Help.
Big Image
DOWNLOADS
Datalogic provides the following data sheet for the PowerScan PD7100.
Buyers Guide
GENERAL INFORMATION
The Datalogic PD7100 is a powerful industrial hand-held 1D barcode scanner.
The PD7100 comes with a choice of two cable interfaces.
The PD7130 models have the Industrial interface which works with Keybord Wedge, RS232, Wand Emulation and USB cables.
The PD7110 models have the IBM/POS interface which works with IBM 46xx, RS232 and USB cables.
A laser pointer beam is available for some PD7130 models.
The scanners come in yellow and black, and black.
Some PowerScan PD7100 models are available as Scanner Kits which include cables.
Other configurations can be built from Scanners, Cables and Power Supplies and Cords.
DIMENSIONS AND WEIGHT
The scanner dimensions are 203 x 76 x 114mm (8.0 x 3.0 x 4.5").
The weight is 0.280kg (0.62lb).
ENVIRONMENTAL
The scanner can withstand fifty 2m (6.6') drops to concrete.
The operating temperature for the scanner is -30º to 50ºC.
The scanner is protected to IP65 which means that it is completely sealed to dust and withstands low pressure water jets from all directions.
CABLES AND INTERFACES
The scanner has a choice of two cable interfaces - Industrial and IBM/POS.
Kits come with cables.
A range of USB, KBW, RS232, IBM466 and Wand Emulation is available.
POWER REQUIREMENTS
The scanner requires 4 to 14 V.
The power requirement is 285MA at 5VDC.
RESOLUTION AND READING RANGES
Maximum resolution is 3mil.
5mil: 1.5 to 14.0cm (0.6 to 5.5").
7.5mil: 0 to 44.0cm (0 to 17.3").
10mil: 0 to 60.0cm (0 to 23.6").
13mil :0 to 80.0cm (0 to 31.5").
20mil: 0 to 119.0cm (0 to 46.9").
40mil: 2.0 to 240.00cm (0.8 to 94.5").
55mil Reflective: 5.0 to 300.0cm (2.0 to 118.1").
100mil Reflective:13.0 to 530.0cm (5.1 to 208.7")
WARRANTY
The scanner comes with a 36 month factory warranty.
CABLES
The Datalogic PowerScan PD7100 barcode scanner requires a cable for connection to PCs or other equipment.
The cable must match the scanner cable interface.
The PD7130 has the Standard interface which caters for Keyboard Wedge, RS232, USB and Wand Emulation cables.
The PD7110 has IBM/POS interface and works with IBM 46xx, RS232 and USB cables.
The communication cable also carries power to the scanner.
Most USB, Keyboard Wedge, Wand Emulation and IBM 46xx connections are able to supply power directly to the scanner from the connected equipment. In some cases external power may be required.
Standard RS232 ports cannot provide power and RS232 connections will generally need the assistance of an external power supply.
Where external power is required a cable with an external power socket must be used.
If you need help in choosing a cable please ASK FOR HELP giving full details of the equipment involved.
USB CABLES
Datalogic CAB-486.
Coiled 4.5m (15') USB Cable with a Power Plus Connector.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052021.
Warranty: 3 Months.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
Datalogic CAB-524.
Coiled 2.7m (8') USB Cable with a Type A Connector.
Power is supplied to the Scanner from the Connected Equipment.
Warranty: 3 Months.
Delivery 2-3 days.
Price does not include delivery charge.
RS232 CABLES
Datalogic CAB-434.
Coiled 2.4m (8') RS232 Cable with a Female DB9 Connector and an Optional Power Socket.
Power is supplied to the Scanner from the Connected Equipment or from an External Power Supply.
Also known as 90A051965.
Warranty: 3 Months.
Delivery 2-3 days.
Price does not include delivery charge.
Datalogic CAB-451.
Coiled 1.8m (6') RS232 Cable with a 7 Pin Amphanol DIN Plug.
For the Motorola VRS 79/89xx.
Power is supplied from the Connected Equipment.
Also known as 90A051983.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
Datalogic CAB-450.
Coiled 3.6m (12') RS232 Cable with a 16 Pin Fischer Connector.
For the Motorola VRC 6940.
Power is supplied from the Connected Equipment.
Also known as 90A051982.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
Datalogic CAB-509.
Coiled 3.6m (12') Industrial RS232 Cable with a Male DB25 Connector and a Power Socket.
For use with the CBX800.
External Power is required.
Warranty: 3 Months.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
KEYBOARD WEDGE CABLES
Datalogic CAB-437.
Coiled 2.7m (9') KBW Cable with PS/2 mini-DIN Connectors.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A051968.
Not for PD7110.
Warranty: 3 Months.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
WAND EMULATION CABLES
Datalogic CAB-470.
Straight 1.8m (6') Industrial Wand Emulation Cable with 9 Pin Male D Slide Lock Connector.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052003.
Not for PD7110.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
£POA
Datalogic CAB-473.
Coiled 2m (6.5') Wand Emulation Cable with a Male D9 Slide Lock Connector.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052006.
Not for PD7110.
Warranty: 3 Months.
Datalogic CAB-488.
Coiled 6m (20')Industrial Wand Emulation Cable with a 6 Pin RJ Plug Connector.
For Decathalon.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052023.
Not for PD7110.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
Datalogic CAB-489.
Coiled 2.4m (8') Industrial Wand Emulation Cable with a 7 Pin Lemo Plug Connector.
For LXE 11x0/12x0/21x0/22x0 and 5200 Series.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A0952024.
Not for PD7110.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
£POA
Datalogic CAB-491.
CAB-491 Coiled 2.4m (8') Industrial Wand Emulation Cable with a 10 Pin RJ Plug Connector.
For Intermec 5020/97x0/Antares/Janus 2010/T2455/T2481.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052026.
Not for PD7110.
Warranty: 3 Months.
Datalogic CAB-487.
Coiled 2.4m (8') Industrial Wand Emulation Cable with a 6 Pin RJ Plug Connector.
For Intermec 9440/9560. Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052022.
Not for PD7110.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
IBM 46XX CABLES
£POA
Datalogic CAB-469.
Coiled 3.6m (12') Industrial IBM 46xx Port 9 Cable with a 4 Pin SDL A-Key Plug Connector.
Power is supplied to the Scanner from the Connected Equipment.
Also known 90A052001.
Not for PD7130.
Warranty: 3 Months.
POWER SUPPLIES AND CORDS
POWER SUPPLIES
Datalogic 8-0935.
12V DC Regulated Power Supply.
Needs a Mains Power Cord with an IEC Connector.
Needs a Mains Power Cord with an IEC Connector.
Delivery 2-3 days.
Price does not include delivery charge.
MAINS POWER CORDS
Datalogic 6003-0923.
UK Power Cord with a UK Plug and an IEC Connector.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
Datalogic 6003-0940.
EU Power Cord.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
ACCESSORIES
Datalogic 11-0111.
Universal Mounting Kit for PowerScan 7000.
Warranty: 36 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
£POA
Datalogic 11-0110.
Hands-Free Stand for PowerScan 7000.
Warranty: 36 Months.
Datalogic 7-0404.
Industrial Take-Up Reel.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
Datalogic 891000098.
Tether Hook for PowerScan 7000 and 8000.
Pack of 5.
This product has been discontinued and is available while stocks last.
For advice on alternatives please ASK.
Price does not include delivery charge.
PRODUCT LIST
PART | DESCRIPTION | DELIVERY | PRICE | |
---|---|---|---|---|
11-0110 | Hands-Free Stand for PowerScan 7000. | ASK | £POA | |
6003-0923 | UK Power Cord with a UK Plug and an IEC Connector. | ASK | £6.53 | |
6003-0940 | EU Power Cord. | ASK | £3.71 | |
7-0404 | Industrial Take-Up Reel. | ASK | £31.32 | |
8-0935 | 12V DC Regulated Power Supply. | 2-3 days | £12.07 | |
CAB-434 | Coiled 2.4m (8') RS232 Cable with a Female DB9 Connector and an Optional Power Socket. | 2-3 days | £21.13 | |
CAB-437 | Coiled 2.7m (9') KBW Cable with PS/2 mini-DIN Connectors. Not for PD7110. | ASK | £20.75 | |
CAB-469 | Coiled 3.6m (12') Industrial IBM 46xx Port 9 Cable with a 4 Pin SDL A-Key Plug Connector. Not for PD7130. | ASK | £POA | |
CAB-473 | Coiled 2m (6.5') Wand Emulation Cable with a Male D9 Slide Lock Connector. Not for PD7110. | ASK | £POA | |
CAB-486 | Coiled 4.5m (15') USB Cable with a Power Plus Connector. | ASK | £34.33 | |
CAB-491 | CAB-491 Coiled 2.4m (8') Industrial Wand Emulation Cable with a 10 Pin RJ Plug Connector. Not for PD7110. | ASK | £POA | |
CAB-509 | Coiled 3.6m (12') Industrial RS232 Cable with a Male DB25 Connector and a Power Socket. | ASK | £22.84 | |
CAB-524 | Coiled 2.7m (8') USB Cable with a Type A Connector. | 2-3 days | £21.13 |
DELIVERY
Our standard charge for 2-3 day delivery to most locations in mainland UK is £10.
This charge is subject to a weight limit of 20Kg.
For consignments which are heavier than 20Kg we reserve the right to add a surcharge.
If your order includes products from more than one manufacturer we may need to ship items from more than one warehouse and in such circumstances there may be a carriage surcharge.
We will agree any carriage surcharge with you before accepting your order.
If you need delivery outside mainland UK please contact us at sales@decisiontechnology.co.uk to confirm the delivery charge before placing your order.
HELP
If you need help please call us on +44 (0)20 8979 5533 or email us at sales@decisiontechnology.co.uk.
We try to respond to emails within a few hours.