IMPORTANT NOTICE - Sage Pay has withdrawn support for your browser for security reasons. If you would like to make a purchase with a card you will need to switch to a current browser such as FireFox, Chrome or Internet Explorer 9 or above. Please accept our apologies for the inconvenience.
END OF LIFE NOTICE
This product has been discontinued by the manufacturer.
The replacement is the Datalogic PowerScan PD9330.
There is no replacement for Wand Emulation models or the Undecoded PD8340-AR.
Some compatible products may still be available. Please see the menu above.
If you need assistance in selecting an alternative please ask for Help.
Big Image
DOWNLOADS
Datalogic provides the following data sheet for the PowerScan PD8300.
Buyers Guide
GENERAL INFORMATION
The Datalogic PowerScan PD8300 is a high performance hand-held laser barcode scanner.
The PD8300 comes in two models, Standard Range and Auto-Range.
The Standard Range model can read barcodes at up to 1m and the Auto Range model reads from 10cm to 10m, and out to 15m for reflective labels.
PD8330 models work with Keyboard Wedge, RS232, USB and Wand Emulation cables.
The PD8340-AR has undecoded output and works with TTL cables.
The scanners have a yellow and black colour scheme.
Some PowerScan PD8300 models are available as Scanner Kits which include cables.
Other configurations can be built from Scanners, Cables and Power Supplies and Cords.
DIMENSIONS AND WEIGHT
The scanner dimensions are 207 x 76 x 114mm (8.1 x 3.0 x 4.5").
The weight is 0.295kg (0.65lb).
ENVIRONMENTAL
The scanner can withstand fifty 2m (6.6') drops to concrete.
The operating temperature for the scanner is -30º to 50ºC.
The scanner is protected to IP65. It is completely sealed to dust and withstands low pressure water jets from all directions.
POWER REQUIREMENTS
The scanner requires 4 to 30 V.
The power requirement is 370mA at 5VDC.
RESOLUTION AND READING RANGES
STANDARD RANGE
Maximum resolution is 3mil.
5mil: 2.1 to 13.3cm (0.8 to 5.2") 7.5mil: 3.5 to 24.2cm (1.4 to 9.5") 10mil: 2.9 to 42.8cm (1.1 to 16.8") 13mil: 2.3 to 55.1cm (2.5 to 30.9") 20mil: 6.3 to 78.5cm (2.5 to 30.9") 40mil: 2.5 to 97.8cm (1.0 to 38.5")
AUTO-RANGE
7.5mil: 7.0 to 46.5cm (2.7 to 18.3") 10mil: 10.8 to 85.0cm (4.2 to 33.5") 13mil: 12.7 to 147.3cm (5.0 to 58.0") 20mil: 7.0 to 215.9cm (2.7 to 85.0") 40mil: 16.0 to 340.0cm (6.3 to 133.8") 55mil: 0.2 to 4.1m (0.7 to 13.5') 100mil Reflective:1.5 to 12.5m (4.9 to 41')
WARRANTY
The scanner comes with a 36 month factory warranty.
CABLES
The Datalogic PowerScan PD8300 barcode scanner requires a cable for connection to PCs or other equipment.
The cable must match the scanner cable interface.
The PD8330 has the Standard interface which caters for Keyboard Wedge, RS232, USB and Wand Emulation cables.
The PD8340 has undecoded output and needs a TTL cable.
The communication cable also carries power to the scanner.
Most USB, Keyboard Wedge, Wand Emulation and TTL connections are able to supply power directly to the scanner from the connected equipment. In some rare cases external power may be required.
Standard RS232 ports cannot provide power and RS232 connections will generally need the assistance of an external power supply.
Where external power is required a cable with an external power socket must be used.
If you need help in choosing a cable please ASK FOR HELP giving full details of the equipment involved.
USB CABLES
£21.13
£25.36
inc VAT
Datalogic CAB-524.
Coiled 2.7m (8') USB Cable with a Type A Connector.
Power is supplied to the Scanner from the Connected Equipment.
Not for PD8340.
Warranty: 3 Months.
Delivery 2-3 days.
Price does not include delivery charge.
RS232 CABLES
£17.78
£21.34
inc VAT
Datalogic CAB-433.
Straight 1.8m (6') RS232 Cable with a Female DB9 Connector and an Optional Power Socket.
Power is supplied to the Scanner from the Connected Equipment on Pin 9 or from an External Power Supply.
Also known as 90A051964.
Not for PD8340.
Warranty: 3 Months.
Delivery 2-3 days.
Price does not include delivery charge.
Datalogic CAB-451.
Coiled 1.8m (6') RS232 Cable with a 7 Pin Amphanol DIN Plug.
For the Motorola VRS 79/89xx.
Power is supplied from the Connected Equipment.
Also known as 90A051983.
Not for PD8340.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
£21.13
£25.36
inc VAT
Datalogic CAB-434.
Coiled 2.4m (8') RS232 Cable with a Female DB9 Connector and an Optional Power Socket.
Power is supplied to the Scanner from the Connected Equipment or from an External Power Supply.
Also known as 90A051965.
Not for PD8340.
Warranty: 3 Months.
Delivery 2-3 days.
Price does not include delivery charge.
£21.13
£25.36
inc VAT
Datalogic CAB-471.
Coiled 3m (10') RS232 Cable with a Female DB25 Connector and an Optional Power Socket.
Power is supplied to the Scanner from the Connected Equipment on Pin 25 or from an External Power Supply.
Also known as 90A052004.
Not for PD8340.
Warranty: 3 Months.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
£20.75
£24.90
inc VAT
Datalogic CAB-472.
Coiled 3m (10') RS232 Cable with a Female DB25 Connector and an Optional Power Socket.
Power is supplied to the Scanner from the Connected Equipment on Pin 25 or from an External Power Supply.
Also known as 90A052005.
Not for PD8340.
Warranty: 3 Months.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
£21.13
£25.36
inc VAT
Datalogic CAB-501.
Straight 3.2m (10.5') RS232 Cable with a Female DB9 Connector and an Optional Power Socket.
Power is supplied to the Scanner from the Connected Equipment on Pin 9 or from an External Power Supply.
Also known as 90A052036.
Not for PD8340.
Warranty: 3 Months.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
£24.91
£29.89
inc VAT
Datalogic CAB-474.
Coiled 3.6m (12') RS232 Cable with a Female DB25 Connector and an Optional Power Socket.
Power is supplied to the Scanner from the Connected Equipment on Pin 25 or from an External Power Supply.
Also known as 90A052009.
Not for PD8340.
Warranty: 3 Months.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
£24.91
£29.89
inc VAT
Datalogic CAB-512.
Coiled 3.6m (12') Industrial RS232 Cable with a Male DB25 Connector.
For the CBX100, CBX500 and CBX800.
Power is supplied to the Scanner from the Connected Equipment on Pin 13.
Not for PD8340.
Warranty: 3 Months.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
Datalogic CAB-450.
Coiled 3.6m (12') RS232 Cable with a 16 Pin Fischer Connector.
For the Motorola VRC 6940.
Power is supplied from the Connected Equipment.
Also known as 90A051982.
Not for PD8340.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
£46.58
£55.90
inc VAT
Datalogic CAB-477.
Coiled 7.6m (25') RS232 Cable with a Female DB25 Connector and an Optional Power Socket.
Power is supplied to the Scanner from the Connected Equipment on Pin 25 or from an External Power Supply.
Also known as 90A052012.
Not for PD8340.
Warranty: 3 Months.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
KEYBOARD WEDGE CABLES
£20.75
£24.90
inc VAT
Datalogic CAB-437.
Coiled 2.7m (9') KBW Cable with PS/2 mini-DIN Connectors.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A051968.
Not for PD8340.
Warranty: 3 Months.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
WAND EMULATION CABLES
Datalogic CAB-470.
Straight 1.8m (6') Industrial Wand Emulation Cable with 9 Pin Male D Slide Lock Connector.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052003.
Not for PD8340.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
£POA
Datalogic CAB-473.
Coiled 2m (6.5') Wand Emulation Cable with a Male D9 Slide Lock Connector.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052006.
Not for PD8340.
Warranty: 3 Months.
Datalogic CAB-488.
Coiled 6m (20')Industrial Wand Emulation Cable with a 6 Pin RJ Plug Connector.
For Decathalon.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052023.
Not for PD8340.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
Datalogic CAB-489.
Coiled 2.4m (8') Industrial Wand Emulation Cable with a 7 Pin Lemo Plug Connector.
For LXE 11x0/12x0/21x0/22x0 and 5200 Series.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A0952024.
Not for PD8340.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
£POA
Datalogic CAB-491.
CAB-491 Coiled 2.4m (8') Industrial Wand Emulation Cable with a 10 Pin RJ Plug Connector.
For Intermec 5020/97x0/Antares/Janus 2010/T2455/T2481.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052026.
Not for PD8340.
Warranty: 3 Months.
Datalogic CAB-487.
Coiled 2.4m (8') Industrial Wand Emulation Cable with a 6 Pin RJ Plug Connector.
For Intermec 9440/9560. Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052022.
Not for PD8340.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
£POA
Datalogic CAB-490.
Straight 4.5m (15') Industrial Wand Emulation Cable with a Female D9 Squeeze Connector.
Power is supplied to the Scanner from the Connected Equipment.
Also known as 90A052025.
Not for PD8340.
Warranty: 3 Months.
TTL CABLES
Datalogic CAB-468.
CAB-468 Coiled 2.4m (8') Undecoded Cable with Male D9 Sliding Lock Connector.
Power is supplied to the Scanner from the Connected Equipment.
For the Industrial Range of Datalogic Scanners.
Also known as 90A052000.
Not for PD8330.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
Datalogic CAB-505.
Coiled 3.6m (12') Industrial Undecoded Cable with a D9 Squeeze Connector.
Power is supplied to the Scanner from the Connected Equipment.
Not for PD8330.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
Datalogic CAB-468-C003.
CAB-468-C003 Coiled 2.4m (8') TTL Cable with 8 Pin Fischer Plug Connector.
Undecoded Output. for Motorola VRC 6940.
Power from Connected Equipment.
Not for PD8330.
Warranty: 3 Months.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
POWER SUPPLIES AND CORDS
POWER SUPPLIES
Datalogic 90ACC1883.
PG12-10P55 12VDC Power Supply.
Needs a Mains Power Cord.
Needs a Mains Power Cord.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
MAINS POWER CORDS
£3.64
£4.37
inc VAT
Datalogic 90ACC1887.
UK Mains Power Cord.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
£1.77
£2.12
inc VAT
Datalogic 90ACC1885.
EU Mains Power Cord.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
ACCESSORIES
£9.19
£11.03
inc VAT
Datalogic HLD-P080.
HLD-8000 Desk/Wall Holder.
Delivery 2-3 days.
Price does not include delivery charge.
£29.71
£35.65
inc VAT
Datalogic HLS-P080.
Universal Holster HLS-8000.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
£25.50
£30.60
inc VAT
Datalogic PC-P080.
PC-8000 Protective Case/Belt Holster for PM8300 Models with No Display Screen.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
£POA
Datalogic STD-P080.
Hands-Free Stand.
Datalogic 90ACC1876.
Metal Mounting Plate for Stand.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
£31.32
£37.58
inc VAT
Datalogic 7-0404.
Industrial Take-Up Reel.
AVAILABLE TO ORDER. PLEASE CHECK LEAD TIME.
Price does not include delivery charge.
£17.19
£20.63
inc VAT
Datalogic 891000098.
Tether Hook for PowerScan 7000 and 8000.
Pack of 5.
This product has been discontinued and is available while stocks last.
For advice on alternatives please ASK.
Price does not include delivery charge.
Datalogic VMK-8000.
VMK-8000 Vehicle Mount Kit.
This product has been discontinued and is sold out.
For advice on alternatives please ASK.
PRODUCT LIST
| PART | DESCRIPTION | DELIVERY | PRICE | |
|---|---|---|---|---|
| 7-0404 | Industrial Take-Up Reel. | ASK | £31.32 | |
| 90ACC1885 | EU Mains Power Cord. | ASK | £1.77 | |
| 90ACC1887 | UK Mains Power Cord. | ASK | £3.64 | |
| CAB-433 | Straight 1.8m (6') RS232 Cable with a Female DB9 Connector and an Optional Power Socket. Not for PD8340. | 2-3 days | £17.78 | |
| CAB-434 | Coiled 2.4m (8') RS232 Cable with a Female DB9 Connector and an Optional Power Socket. Not for PD8340. | 2-3 days | £21.13 | |
| CAB-437 | Coiled 2.7m (9') KBW Cable with PS/2 mini-DIN Connectors. Not for PD8340. | ASK | £20.75 | |
| CAB-471 | Coiled 3m (10') RS232 Cable with a Female DB25 Connector and an Optional Power Socket. Not for PD8340. | ASK | £21.13 | |
| CAB-472 | Coiled 3m (10') RS232 Cable with a Female DB25 Connector and an Optional Power Socket. Not for PD8340. | ASK | £20.75 | |
| CAB-473 | Coiled 2m (6.5') Wand Emulation Cable with a Male D9 Slide Lock Connector. Not for PD8340. | ASK | £POA | |
| CAB-474 | Coiled 3.6m (12') RS232 Cable with a Female DB25 Connector and an Optional Power Socket. Not for PD8340. | ASK | £24.91 | |
| CAB-477 | Coiled 7.6m (25') RS232 Cable with a Female DB25 Connector and an Optional Power Socket. Not for PD8340. | ASK | £46.58 | |
| CAB-490 | Straight 4.5m (15') Industrial Wand Emulation Cable with a Female D9 Squeeze Connector. Not for PD8340. | ASK | £POA | |
| CAB-491 | CAB-491 Coiled 2.4m (8') Industrial Wand Emulation Cable with a 10 Pin RJ Plug Connector. Not for PD8340. | ASK | £POA | |
| CAB-501 | Straight 3.2m (10.5') RS232 Cable with a Female DB9 Connector and an Optional Power Socket. Not for PD8340. | ASK | £21.13 | |
| CAB-512 | Coiled 3.6m (12') Industrial RS232 Cable with a Male DB25 Connector. Not for PD8340. | ASK | £24.91 | |
| CAB-524 | Coiled 2.7m (8') USB Cable with a Type A Connector. Not for PD8340. | 2-3 days | £21.13 | |
| HLD-P080 | HLD-8000 Desk/Wall Holder. | 2-3 days | £9.19 | |
| HLS-P080 | Universal Holster HLS-8000. | ASK | £29.71 | |
| PC-P080 | PC-8000 Protective Case/Belt Holster for PM8300 Models with No Display Screen. | ASK | £25.50 | |
| STD-P080 | Hands-Free Stand. | ASK | £POA |
DELIVERY
Our standard charge for 2-3 day delivery to most locations in mainland UK is £10.
This charge is subject to a weight limit of 20Kg.
For consignments which are heavier than 20Kg we reserve the right to add a surcharge.
If your order includes products from more than one manufacturer we may need to ship items from more than one warehouse and in such circumstances there may be a carriage surcharge.
We will agree any carriage surcharge with you before accepting your order.
If you need delivery outside mainland UK please contact us at sales@decisiontechnology.co.uk to confirm the delivery charge before placing your order.
HELP
If you need help please call us on +44 (0)20 8979 5533 or email us at sales@decisiontechnology.co.uk.
We try to respond to emails within a few hours.
Updated 2024-07-24 at 12:08:27.
Errors and Omissions Excepted.
